HSP Bronto PRO brushless 1/10 truck

On the third bronto pro, got lucky on this one 🙂

Running on Hobbywing EZRUN 10SL esc (60A?) with 3300kv (12T) motor.

*11/25/16 1011h – cleaned it off some dust, hopefully can test it out this afternoon, weather permitting.

All hub carriers are in violet alum metal. Also their respective part numbers from the catalogue.

Close-up.

Above trial with a Hobby king 2.4 radio.

Reference below for the BL ESC calibration…

Below is a handwritten rendition… 🙂 

Today I was able to calibrate the ESC of bronto no.2 (with the 5.5T BL motor) according to the instructions above. It was successful!

The set button is the tiny red button on the lower right and the power button is the slide switch at the left middle portion of the photo.Below is another view of the ESC.